TiVoCommunity.com
(c)opyright 1995-2005 All rights reserved
indexcheckTC
This area is a static history of posts in the TiVo Community Forum Archive.
This archive history was made for the simple indexing of search sites like Google.



Pages:1



DSR704 upgrade problems

(Click here to view the original thread with full colors/images)



Posted by: urubos

I have recently purchased a DSR704 Directivo and upgraded the hardrive to a 160GB Maxtor. I used sleeper to Monte the system and everything seemed to go just fine. I booted up the system and was watching tv in no time. However, since then my tivo will only stay up for about 10-15 minutes at a time before it spontaneously reboots. I have tried running with the cover off in case of a heat issue but that doesnt seem to do it. The following is an edited copy of my serial bash sesion. Any ideas?

3oslink: 00 00 00 Access Card: Not Inserted Tuner[0]: Not Locked
Tuner[1]:
Not Locked
oslink: 01 00 00 Access Card: Inserted Tuner[0]: Not Locked
Tuner[1]:
Not Locked
oslink: 01 01 00 Access Card: Inserted Tuner[0]: Locked
Tuner[1]:
Not Locked
Initialize with 2 live caches
Helper Thread 166 (for 165) waking up
Helper Thread 168 (for 167) waking up
DTuneOpen called
DDLOpen called
DDLInitRead called
DTuneOpen called
DTuneRelease called
DTuneOpen called
DDLOpen called
DDLInitRead called
DDLRelease called
DDLOpen called
DDLInitRead called
ApgManager Transition from state INIT to ACQUIRE_MARKER
No response when asking version info, tried 10 times.
Microcode version is TiVo!
ApgManager Transition from state ACQUIRE_MARKER to BOOT
Adding networks of interest...ApgBootState:::DoBackgroundWork
ApgBootState:::DoBackgroundWork
ApgManager Transition from state BOOT to FAST_LOAD
In ClearChannels
Out ClearChannels
ApgManager Transition from state FAST_LOAD to PREP_SETUP
ApgManager Transition from state PREP_SETUP to EXPRESSION_EVALUATION
ApgManager Transition from state EXPRESSION_EVALUATION to STEADY_STATE
oslink: 01 07 00 Access Card: Inserted Tuner[0]: Locked
Tuner[1]:
Not Locked
[myworld:179] Illegal instruction 0077d69c at 10043e58 ra=0066f244
Tmk Fatal Error: Thread ContextMgr event handler <179> died due to
signal 4
pc 0x10043e5c status 0x8001d413 cause 0x000028 bva 0x7f76b7dc hi
0x005fbf lo 0xb
fc01ec0
R00 0x00000000 R01 0x800f9b84 R02 0x100127c0 R03 0xffffffff
R04 0x0000015e R05 0x0000001c R06 0x00000009 R07 0x7f6cc270
R08 0x7f6cc318 R09 0x7f6cc0dc R10 0x7f6cc120 R11 0x7f6cc1c8
R12 0x00005f20 R13 0x000000af R14 0x00000040 R15 0x80808081
R16 0x7f6f956c R17 0x7f76a5f4 R18 0x00000007 R19 0x00000001
R20 0x00e1f450 R21 0x7fff73d8 R22 0x7fff73a8 R23 0x7fff73e0
R24 0x0000bec0 R25 0x10043e50 R26 0x00000000 R27 0x00000000
R28 0x10043e50 R29 0x7fff7330 R30 0x00000004 R31 0x0066f244
F00 0x415e6ecd9999999a F02 0x000000000079bb36
F04 0xffffffffffffffff F06 0xffffffffffffffff
F08 0xffffffffffffffff F10 0xffffffffffffffff
F12 0xffffffffffffffff F14 0xffffffffffffffff
F16 0xffffffffffffffff F18 0xffffffffffffffff
F20 0xffffffffffffffff F22 0xffffffffffffffff
F24 0xffffffffffffffff F26 0xffffffffffffffff
F28 0xffffffffffffffff F30 0xffffffffffffffff
csr 0x001004 eir 0x005410
10043e5c do_page_fault() #2: sending SIGSEGV to myworld for illegal
read access
from
0fff723c (epc == 00d58330, ra == 00d58920)
Restarting system.



Posted by: lgkahn

is the disk getting full so you are over 137 gig. if so did you use maxblast 3 to reduce the size of the disk... the series 2 kernel only supports 137 gig and if you go over it is will screw up



Posted by: urubos

just double checked...thought it was a 160gb that i had transfered from my series 1...but it was just a 120gb

and definatly not full, in fact i havent managed to record anything yet.



Posted by: lgkahn

what is in the tverr log.... in /var/logs





vBulletin Copyright ©2000 - 2009, Jelsoft Enterprises Limited.
vB Easy Archive Final ©2000 - 2009 - Created by Stefan "Xenon" Kaeser Modified by Adam J. de Jaray