Need Hughes HDVR2 3.1.1c image - TiVo Community Forum Archive 1

READ ONLY ARCHIVES

Welcome to the TiVo Community Forum Archive
This archive covers threads on TiVo Community Forum that have not been posted to from the start until June 30, 2004. Any thread that has a post made to it between 7/1/04 and 12/31/05, that had not been posted to, will be found in Archive 2.
This is a READ ONLY site.

Search | ARCHIVE 2 | MAIN SITE

TiVo Community Forum Archive 1 : Powered by vBulletin version 2.2.8

TiVo Community Forum Archive 1 > Underground Playground > TiVo Upgrade Center

>>> Need Hughes HDVR2 3.1.1c image <<<

Forum Jump:

Search this Thread:

Last Thread Next Thread

Author

Thread ---> Show Printable Version | Email this Page | Subscribe to this thread

03-31-2004 04:28 AM

Colby
New Member

Registered: Mar 2003
Location: Austin, TX
Posts: 18

Need Hughes HDVR2 3.1.1c image

If you have one, please pm me. I'm sick and tired of waiting for the update from DirecTV. I've got the error message about not having full guide info and want to get rid of it.

POST #1 | Report this post to a moderator | IP: Logged

03-31-2004 08:08 AM

litzdog911
TiVo Forum Special Member

Registered: Oct 2002
Location: Mill Creek, Washington
Posts: 4364

If your HDVR2 is connected to a phone line you should get that update automatically from DirecTV within the 3-4 weeks. For most DirecTivo users the "error message" is simply "cosmetic" and does not indicate an actual problem.

__________________
Sony SAT-T60 DirecTivo 160GB 120 hrs (v3.1.0c2 - Family Room)
HR10-250 HiDef DirecTivo 250GB (v3.1.5e - Family Room)
MX-500 Remote
Sony SAT-A4 Receiver (Bedroom)
Sony SAT-B4 Receiver (Rec Room)
Sony KV-40XBR800 HDTV
Sony STR-DA4ES Dolby Digital Receiver

POST #2 | Report this post to a moderator | IP: Logged

03-31-2004 09:54 AM

burdo
New Member

Registered: Mar 2004
Location:
Posts: 7

I to am waiting for the update, I am unable to use my 2 tuners right now supposedly becasue of a bug that will be fixed by the update. Really sux.

POST #3 | Report this post to a moderator | IP: Logged

03-31-2004 01:47 PM

David Platt
Circa 1974

Registered: Dec 2001
Location: Pittsburgh
Posts: 3150

Re: Need Hughes HDVR2 3.1.1c image

quote:
Originally posted by Colby
If you have one, please pm me. I'm sick and tired of waiting for the update from DirecTV. I've got the error message about not having full guide info and want to get rid of it.

So you'd rather lose all your shows by restoring an image than put up with the message for a little while longer?

__________________
-David

POST #4 | Report this post to a moderator | IP: Logged

03-31-2004 04:13 PM

tivoupgrade
PTVupgrade, Sponsor

Registered: Sep 2000
Location: Chicago, IL USA
Posts: 851

Re: Need Hughes HDVR2 3.1.1c image

quote:
Originally posted by Colby
If you have one, please pm me. I'm sick and tired of waiting for the update from DirecTV. I've got the error message about not having full guide info and want to get rid of it.

You want to be careful about this; something we observed on Series1 DirecTV units:

Back when the transition was being made from 2.5.2 to 3.1, the upgrades were proceeding very slowly. We still had a few units in our labs that were at 2.5.2 even after many of our other units had already upgraded to 3.1. We always knew that putting a version of the software that was earlier on a unit (ie 2.01 on a unit that comes from the factory with 2.5.2 on it) definitely caused problems. We also knew that installing 3.0 on a standalone that had never downloaded it and still had 2.5.1 on it was also not a problem. HOWEVER, putting 3.1 on a DirecTiVo with 2.5.2 IS a problem if the unit has never downloaded it before -- ie the unit will actually try to download the previous version of the software (2.5.2), go into a pending restart, and unsuccessfully install 2.52; ie it will be in a pending restart mode and will reboot itself every day.

In any case, we don't have a situation here where we have (2) of any type of unit, one of which has already downloaded 3.1.1c and one which hasn't, so we can't actually test to see if its safe to put 3.1.1c on a unit if it hasn't already downloaded it.

Not sure if anyone has anything revealing to say here, but if you don't, I'd recommend NOT putting 3.1.1c on the unit unless it is known to not cause a problem.

Hope that helps...

Lou

__________________
PTVupgrade | TiVo Community Special Sponsor

POST #5 | Report this post to a moderator | IP: Logged

03-31-2004 06:01 PM

DVDKingdom
Senior Member

Registered: Oct 2003
Location:
Posts: 452

3.1.1c image does cause errors for a unit that has not been authorized to use it yet. As you can see from my Sig 1 unit that has it the others don't. I restored a backup to 1 unit as a test the unit needed the "clear and Delete Everything" to start, then "local Channels" needed to be reauthorized. Finally when the unit called in a day later it did download a software update that caused it to try and install new software. The software install appeared to be successful. When the unit rebooted all the logos were restored, the unit still had 3.1.1c. Now for the bad news it does exactly what was said by "tivoupgrade" it will reboot everyday to try and install again. I can say it is definitely not worth doing, wait until you are authorized. I even downgraded back to 3.1.1b myself on the test unit.

__________________
DirecTV R10 -- 140 Hrs 6.1
RCA DVR80 -- 70 Hrs 3.1.1e
Hughes HDVR2 -- 35 Hrs 3.1.1e

POST #6 | Report this post to a moderator | IP: Logged

03-31-2004 06:08 PM

tivoupgrade
PTVupgrade, Sponsor

Registered: Sep 2000
Location: Chicago, IL USA
Posts: 851

quote:
Originally posted by DVDKingdom
3.1.1c image does cause errors for a unit that has not been authorized to use it yet. As you can see from my Sig 1 unit that has it the others don't. I restored a backup to 1 unit as a test the unit needed the "clear and Delete Everything" to start, then "local Channels" needed to be reauthorized. Finally when the unit called in a day later it did download a software update that caused it to try and install new software. The software install appeared to be successful. When the unit rebooted all the logos were restored, the unit still had 3.1.1c. Now for the bad news it does exactly what was said by "tivoupgrade" it will reboot everyday to try and install again. I can say it is definitely not worth doing, wait until you are authorized. I even downgraded back to 3.1.1b myself on the test unit.

DVDKingdom -

Thanks for confirming what we thought to be the case. Hopefully people will read this thread because that daily call/download costs TiVo money every time it happens...

__________________
PTVupgrade | TiVo Community Special Sponsor

POST #7 | Report this post to a moderator | IP: Logged

All times are GMT. The time now is 08:19 AM.

Last Thread Next Thread

>>> Need Hughes HDVR2 3.1.1c image <<<

TiVo Community Forum Archive 1 > Underground Playground > TiVo Upgrade Center

Search The Internet

Show Printable Version |

Email this Page |

Subscribe to this thread

Forum Jump:

Search this Thread:

Forum Rules:

You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

HTML code is OFF
vB code is ON
Smilies are ON
[IMG] code is ON

< Contact Us - TiVo Community Forum Archive 1 >

Powered by: vBulletin Version 2.2.8
Copyright ©2000, 2001, Jelsoft Enterprises Limited.
(C)opyright - All Rights Reserved. No information may be posted elsewhere without written permission.
TiVo� is a registered trademark of TiVo Inc. This site is not affiliated with TiVo Inc.
Page generated in 0.05485892 seconds (36.79% PHP - 63.21% MySQL) with 25 queries.

Spider History Index