hinsdale
TiVo Forum Special Member
Registered: Apr 2001
Location: Hinsdale, IL, US
Posts: 75 |
quote:
Originally posted by mrfiegl:
Hello - When running DLGCHK, I keep getting "No IDE drives detected. BIOS test was not performed". I believe that DLGCHK is not unlocking my TIVO drive. I have my CMOS settings for the drives on "Auto". Any ideas on what I can do to get my drive unlocked?
Many Many Thanks - Been messing with this all day.
MK
http://www.9thtee.com/qunlock.exe
This file should be copied to a dos boot floppy. To create a dos boot disk, place a blank disk in your floppy then exit windows to an msdos prompt and type "sys a:" at the c:\ prompt. Return to Windows and then copy the qunlock program to your new dos boot floppy. Place the qunlock dos boot disk in your floppy drive and then power up your PC.
At the A:\ prompt type the following command:
(This command assumes you have your TiVo drive connected as Secondary Master)
qunlock 2
If your drive is connected differently then use the following as reference:
0 for IDE Primary Master
1 for IDE Primary Slave
2 for IDE Secondary Master
3 for IDE Secondary Slave
The drive must be power cycled for the unlock to take effect.
The boot Cd will also automatically unlock the drive.
See this upgrade how-to may be useful: http://www.newreleasesvideo.com/hinsdale-how-to/
POST #2 | Report this post to a moderator
| IP: Logged
|
TiVo Community Forum Archive 1 > Underground Playground > TiVo Underground
09-09-2001 03:27 AM
