mprice
Member
Registered: Aug 2000
Location: Portland, OR
Posts: 0 |
quote: Originally posted by xterra2000:
1)I have a 13GB Maxtor with my PC. Basically I can wipe off everything from it and use it as the backup disk. Then later install the OS and burn the splited backup files to the CDR. How should I setup my 13GB drive? I means should I fdisk it and make it one huge partition with FAT32? or primary FAT 2GB and the other 11GB for FAT32? I understand that we are using the LINUX utility to backup the TIVO drive and according to the HackFAQ, the utility disk support FAT32 as well.. I just want to make sure that I have a right partition for the backup.
2)Hopefully I can get the Maxtor 60GB HR from Staples. (what a drive, it is 60 miles away, hopefully they willing to price match with me.) If I do the upgrade later and started using my new TIVO now, what should I do after I finish the backup?
Thanks for any input.
What you are planning to do is exactly the way I did it, I wanted to make sure the Tivo worked before ripping it apart. Don't worry about partitioning your backup drive. If you use dd, boot Dylans disk, you can simply copy the raw disk image, so any partitions that exist on Tivo disk A will then exist on your backup.
ie dd if=/dev/hdc of=/dev/hdd bs=1024
One thing to bear in mind, is that your 13GB maxtor may not be as big as the 13GB quantum in the Tivo. I ended up using a 15GB quantum and as I'm
not going to use the backup was not worried about the 2GB of unused space.
Once I'd backed up the drive I booted with the backup just make sure I got a good copy. When your maxtor turns up, bless it and plug & play ;-)
Mark.
POST #5 | Report this post to a moderator
| IP: Logged
|