Registered: Jan 2003
Location: Houston
Posts: 1480

I KNOW someone else had this problem not long ago, but I can't seem to find the thread.

I have been ripping CDs to my hard drive all afternoon. I finish and decided to burn a compilation CD. My Drives are gone!

In My Computer, neither of my two drives show up. In the Device Manager, it shows the CD-ROM, but has the DVD-RW disabled and will not re-enable it. Any Ideas?

POST #1 | Report this post to a moderator | IP: Logged

Registered: Oct 2002
Location: alone in the dark
Posts: 4333

Have you checked under your desk? Sorry, couldn't help.

__________________
If you can't beat'em... pay someone to do it.

POST #2 | Report this post to a moderator | IP: Logged

Registered: May 2000
Location: Colorado, USA
Posts: 8017

Astro,

Here is the solution I always suggest. It has worked for some, but not for all. Good luck!

-John

POST #3 | Report this post to a moderator | IP: Logged

Registered: Jan 2003
Location: Houston
Posts: 1480

Thanks John, pardon my ignorance, but what do you mean by upper and lower filters entries?

__________________
TiVo isn't just for orphans, or sick people, or moms that spit out babies like they're baseballs at a batting range. - Skittles

POST #4 | Report this post to a moderator | IP: Logged

Registered: Jan 2003
Location: Houston
Posts: 1480

wait, i think i see...now to reboot!

__________________
TiVo isn't just for orphans, or sick people, or moms that spit out babies like they're baseballs at a batting range. - Skittles

POST #5 | Report this post to a moderator | IP: Logged

Registered: Jan 2003
Location: Houston
Posts: 1480

crap! that did not work, i was all ready to kiss your feet john!

I installed two programs today. The IRiver software that came with my new MP3 player and MusicMatch

__________________
TiVo isn't just for orphans, or sick people, or moms that spit out babies like they're baseballs at a batting range. - Skittles

POST #6 | Report this post to a moderator | IP: Logged

Registered: Jul 2003
Location: Greenville SC
Posts: 1380

does your BIOS acknowledge their existance?
if it does, remove your ide controllers from device manager and reboot.
They SHOULD be re-detected as your IDE controler is re-detected.

__________________
HDVR2 Modified to 120 Hours
If you have to ask, you can't afford it.

POST #7 | Report this post to a moderator | IP: Logged

Registered: May 2000
Location: Colorado, USA
Posts: 8017

Sorry that didn't do it Astro. Maybe try uninstalling those two programs, see if that fixes it? If it doesn't redo my solution and see if it fixes it with those programs uninstalled? Again, good luck.

-John

POST #8 | Report this post to a moderator | IP: Logged

Registered: Jan 2003
Location: Houston
Posts: 1480

quote:

---

Originally posted by Gunnyman2k3
does your BIOS acknowledge their existance?
if it does, remove your ide controllers from device manager and reboot.
They SHOULD be re-detected as your IDE controler is re-detected.

---

POST #9 | Report this post to a moderator | IP: Logged

Registered: Feb 2003
Location: Des Moines, IA
Posts: 1933

Does the DVD work like the CD-Rom does? If you go to start-run and type E:\ (or whatever drive letter the DVD is) does that pull it up?

If it does, then the drives are just hidden, and fixing that will depend on your OS. If not, then you have a little bigger problem.

__________________
-Kyle

POST #10 | Report this post to a moderator | IP: Logged

Registered: May 2001
Location: Grand Rapids, MI
Posts: 5528

quote:

---

Originally posted by AstroDad
yes, they both show up in device manager, but the DVD-RW drive shows as disbaled and I am unable to re-enable it.

I am able to use the CD-rom, but it still doesn't show up under My Computer

---

If you go into Device manager, and from the "View" menu (assuming Win2k or XP), select "Devices by connection", and drill down to your IDE controller and the primary and secondary controllers under that, where do the CD and DVD drives show up?

It's very likely that both drives are on the secondary channel. Enhanced IDE controllers have two channels, each of which can support 2 devices--master and slave (thank God I don't live in California, and I can still say that ). The problem with the master slave configuration is that if the master device starts flipping out, it will most often screw up the slave device.

If they do show up on the same channel, then you can try (if you're comfortable inside the computer) flipping the cable that they share around. Most new computers have their drives set to "cable select" for master slave config (I hate it, but it does make this easier). It might take actually flipping positions of the drives physically--the cables tend to be pretty short. Boot, and see if there's any change.

__________________
Tim
I own a timber company? That's news to me.

Anybody need some wood?

POST #11 | Report this post to a moderator | IP: Logged