Registered: Apr 2002
Location: Bracknell,Berks
Posts: 1

Why does the Tivo remote have to send two pulses when controlling the TV volume.Means my telly volume goes up and down two (on screen) blocks at a time.Too loud or quiet,can never get it quite so..................

POST #1 | Report this post to a moderator | IP: Logged

Registered: Mar 2002
Location: Bromley area
Posts: 107

soond like you have the common "double press" problem with the remote, you need to take it apart and clean the contacts, instuctions found in the sticky notes. Alturnativly if still under warrentee call CS and they will send you another one

__________________
NTL ex C&W Pace 4000 STB with Dongle, Denon 1802 Receiver, Toshiba 510e DVD, Phillips DVDR 1000, Sony Sideshot projector, Phillips Pronto, Thompson 160Gb Tivo

POST #2 | Report this post to a moderator | IP: Logged

Registered: Apr 2002
Location: Bracknell,Berks
Posts: 1

Thxs,
It's actually a new tivo. CS are sending me a new remote.... :0)

__________________
Pace 4001 stb & Tivo upgraded with Maxtor 540X 120Gb

POST #3 | Report this post to a moderator | IP: Logged

Registered: Jan 2001
Location: N.Ireland
Posts: 125

It is probably just that the Tivo remote is sending the volume code a little longer than the TV's remote and the TV interprets this as 2 increments. I don't think there's any cure.

__________________
Stercus accidet!

POST #4 | Report this post to a moderator | IP: Logged